Choose model from drop down list
Digger Anchor Ice Polaris ATV & UTV Mounts
$29.99
Description
Digger Anchor Ice Polaris ATV & UTV Mounts
The Digger Anchor Ice Polaris ATV & UTV Mounts can mount the ice auger carrier or the all season carrier to your Polaris.
Models:
- D-90 Wrench-N Ride: fits ATVs with composite deck
- D-81 Quick Clamp: fits Rangers
Wrench-N-Ride:
Instructions:
- Insert the rubber side of the Wrench-N-Ride expansion plugs into the holes in the deck of your ATV rack.
- Tighten the nut on the topside of the L-Bracket until the rubber expands inside the hole of the rack.
- After both L-Brackets are firmly secured on the composite rack place the Auger Carrier against the uprights of the L-Brackets.
- Once placed against the uprights of the L-Brackets, mark the holes onto the carrier to be drilled.
- Remove the Auger Carrier and drill the marked holes with a 1/4” drill bit.
- After drilling the two holes, place the Auger Carrier against the upright angles and bolt both together with supplied bolts and lock nuts.
Quick Clamp:
Digger Quick Clamp for mounting the Digger Auger Carrier and Digger All Season Carrier on Polaris Ranger UTVs
Instructions:
- Place the Auger Carrier or All Season Carrier on the bed rails of your Polaris Ranger lining up the holes of the carrier base to the matching holes on the rails of the Ranger’s bed rails.
- After determining what holes you are going to utilize take the carrier down and drill the holes out using a 3/8” drill bit.
- Insert the 3/8” threaded bolt through the drilled holes and loosely tighten the wing nut.
- Place the carrier and the pair of Quick Clamps down the holes on the Polaris’s bed rail and tighten wing nuts down.
Check out more Ice Augers here.