Traxstech Aluminum Mounting Tracks

Description

Traxstech Aluminum Mounting Tracks

The foundation of the Traxstech system is an anodized Traxstech Aluminum Mounting Tracks with a grooved interior design.

With the mounting tracks installed on your boat, this gives you the ability to change your style or method of fishing by sliding in our different types of Traxstech rod holders, down-rigger mounts or one of the many accessories we sell in the mounting track and tightening the star-shaped thumbscrews securely in place.

Track is 3 1/2″ wide outside dimension.

Comes in the following lengths:

6 inch, 12 inch, 18 inch, 24 inch, 36 inch, 48 inch, 60 inch, and 72 inch.

When you are not fishing, slide your equipment out of the mounting track and slide in our track insert (sold separately – part # RPIB).

---

Q. What length/size of the mounting track should I mount on my boat?

A. The track is the least expensive item and it is easier to mount one longer track, rather than adding it in smaller sections down the road. IE: If you want to add another rod holder, net holder or adjustable cleat, with the longer track you are already set up for it. Just slide it in and go.

---

Q. Do the mounting tracks come with hardware to install them?

A. Yes. They come with stainless steel 1-3/4″ long screws with lock washers, fender washers, and nuts.

---

Q. What is the minimum length of the track I can use to install my vertical trees to my boat?

A. We recommend using our MT-24 or larger tracks. The longer the track the more stability and strength you will have. Using a smaller length may cause your equipment to fail and the possibility of losing your valuable equipment to the bottom of a lake increases.

---

Q. What is the minimum length of the track I can use to install downriggers to my boat?

A. We recommend using our MT-24 or larger tracks. The longer the track the more stability and strength you will have. We recommend downriggers have a track that is installed directly to the gunnel. Using a smaller length may cause your equipment to fail and the possibility of losing your valuable equipment to the bottom of a lake increases.

---

Has our signature textured finish:

• Adds durability to the aluminum components, hardens your wear surface, no brite reflection, easy to clean.
• Every aluminum part is anodized after our texturing process to provide the highest quality available.
• Salt spray tested and proven.
• Tracks are 3-1/2″ wide.
• Mounting Hardware is included. The Hardware included is to thru-bolt it to the gunnel top.
• Clear / Silver
• Black

Proudly made in the USA!

Models Numbers:

• MT-6
• MT-12
• MT-18
• MT-24
• MT-36
• MT-48
• MT-60
• MT-72

Check out more Traxstech Tracks and Rod Holders here.